Accessories

Blend is a cover made of PVC, whose task is to hide and protect the electrical installation located within the devices. In addition, it affects the aesthetic appearance of conveyors. Blends are available in three colors, and their length depends on the order.

The bands are used to secure the transported product against sliding off the conveyor line. We offer aluminum bands with polymer endings. We adapt the profile by rolling on sections of curves, connecting and direction-changing nodes to ensure the correct flow of cargo. The top edge of the band [...]

The stop plate is used to block packages at the ends of gravity conveyors. Thanks to this element we can use gravity conveyor as a buffering element. The stop plate is attached to the upper surface of the conveyor side profiles.

Connectors are made of a thick galvanized sheet. They allow to connect conveyors modules in a fast and solid way. Each place of connecting requires two elements.

The A1 / SS-01 control cabinet is designed and constructed in accordance with the requirements of the customer’s logistics system. It contains all mechanical and electrical components necessary to control devices. The large A1 / SS-01 control cabinet is designed to support complex [...]

The A1 / SS-02 control cabinet is designed to support simple automation systems. Most often used in lines where the goods are transported from point A to point B. Its small dimensions enable fixing to the structural elements of conveyor lines and do not require the separation of an individual [...]

Sensors detect objects on conveyors and determine their location. They are installed on the conveyor frame together with a reflection mirror that reflects the impulse from the sensor. The kit includes a sensor with a cable and a handle.

The mirror reflects the light beam back to the sensor. The kit includes a mirror and a handle. The mirror with handle is installed directly to the conveyor frame.

The scanner is a device designed to read information saved in the form of a bar code. The reader emits a light beam using a laser diode. A beam of light directed at the bar code reflects and returns to the scanner mirror.

A single support is intended for fixing conveyors to the ground. Available height is in the range of 480 – 1880 mm with additional calibration useful to compensate for uneven ground. It is made of galvanized steel. The single support is used for angular entrances and 60 °, 90 ° arches.

A support is intended for fixing conveyors to the ground. Available height is in the range of 480 – 1880 mm with additional calibration useful to compensate for uneven ground. It is made of galvanized steel. The light support can be used in all types of conveyors.

The support is intended for fixing conveyors to the ground. Available height in the range of 480 – 1880 mm with additional calibration useful to compensate for uneven ground. The heavy support is covered with a varnish coat. Heavy support can be used in each type of conveyors, especially [...]

Storey support is intended for fixing conveyors to the ground. Available height 1880 mm with additional calibration useful to compensate for uneven ground. The support is made of galvanized steel. Heavy supports are used in the two or three storey lines.