Lineshaft Conveyor
The lineshaft conveyor is a simple and very popular solution for transporting loads. The system requires a small number of drives, which significantly reduces the cost of the conveyor. One gearmotor can drive a line up to 15 meters long.
Drive transmission can also take place at the connection of a straight section with a curve or angle connector.
Lineshaft drive
Driven lineshaft is a conveyor driven by a royal shaft, which mediates in the drive of rollers by the engine. The drive module is a segment equipped with its own drive. It is a basic module that is connected to passive segments, curves and angle connectors in any configuration. The device [...]
Passive lineshaft
Passive Lineshaft is a segment that is not equipped with a drive. Several passive modules connected together with the drive module form the lineshaft system lines. The device consists of a steel frame, rollers, shaft, PU strips and blends.
Lineshaft roller curve 30°
The curve with royal shaft changes the direction of movement of the load. The conical shape of the rollers keeps objects between the side profiles. The curve connected to the driven module forms the lineshaft system. The device consists of a steel frame bent at an angle of 30°, rollers, shafts, [...]
Lineshaft roller curve 45°
The curve with royal shaft changes the direction of movement of the load. The conical shape of the rollers keeps objects between the side profiles. The curve connected to the driven module forms the lineshaft system. The device consists of a steel frame bent at an angle of 45°, rollers, shafts, [...]
Lineshaft roller curve 60°
The curve with royal shaft changes the direction of movement of the load. The conical shape of the rollers keeps objects between the side profiles. The curve connected to the driven module forms the lineshaft system. The device consists of a steel frame bent at an angle of 60°, rollers, shafts, [...]
Lineshaft roller curve 90°
The curve with royal shaft changes the direction of movement of the load. The conical shape of the rollers keeps objects between the side profiles. The curve connected to the driven module forms the lineshaft system. The device consists of a steel frame bent at an angle of 90°, rollers, shafts, [...]
Lineshaft infeed 30°
The lineshaft infeed depending on the location, helps to put loads on the main line or lead them to the side line. Connected with the drive module, they form a lineshaft system. The device consists of a steel frame shaped at an angle of 30°, rollers, shaft, PU straps and blends.
Lineshaft infeed 45°
The lineshaft infeed depending on the location, helps to put loads on the main line or lead them to the side line. Connected with the drive module, they form a lineshaft system. The device consists of a steel frame shaped at an angle of 45°, rollers, shaft, PU straps and blends.
